Skip to main content

VIBROCONTROL 1000

The VIBROCONTROL 1000 (VC-1000) family of vibration monitors (series AP, RV, and CV) has been in use for many decades and in very many applications whenever a single-channel monitoring of case vibration was sufficient to protect a machine.

VIBROCONTROL 1000 Models

VIBROCONTROL 1000 Series C

Monitors vibrations of the machine or bearing housings.

Electro-dynamic vibration sensors are used, mounted either horizontally, vertically, or axially to provide the vibration signals.

  • RMS value of vibration velocity
  • Peak value of vibration displacement

Sensor: Vibration velocity sensor (e.g. VS-068)

VIBROCONTROL 1000 Series R

Monitors the vibrations of the shaft relative to the bearing.

The signals are provided by two non-contacting sensors mounted in the same radial plane at 90º to each other.

Measurement parameter:

  • Smax acc. to DIN ISO 7919
  • MAX (x,y) acc. to API 670

Sensors: 2 (x and y) non-contacting type (SD-05x or IN-08x)

VIBROCONTROL 1000 Series A

Monitors the axial position of the shaft. The signal is provided by a single non-contacting sensor.

Measurement parameter:

  • Static axial position relative to a pre-selected position

Sensor: 1 non-contacting displacement sensor (SD-xxx or IN-08x Series)

All documents in PDF format unless stated otherwise.

Safety and reliability related values according to DIN EN ISO 13849-1: